This underwater housing is compact and specially designed for Fujifilm XT10 Camera with 16-50mm lens. The rubberized polycar-bonate construction makes the case durable and resistant to corrosion. Special polycarbonate blends allow users to create an extremely strong and lightweight enclosure. The housing has a depth rating of 130'(40m). Simply drop the camera in and close the housing via the snap closure. It is configured with mechanical controls enabling accesss to all important camera functions. Ideal for diving at sea, surfing, snorkeling, skiing, yacht or other activities.
Standard1/4" screw holes at the bottom for additional accessories, like handles, external flash attachment, etc.
Maximum underwater depth is 40M
With leak detector
All camera functions except touch panel are accessible
Flat glass port with anti-reflection coating on both sides
Clear view the camera information and control function
Protects your camera from scratches, sand, dirts, water, snow, etc.
Lens: Super clear lens for optimal picture quality
Bracket holes: you can mount on your bracket for underwater shooting
100% tested: we test every single one case to ensure the 100% waterproof
Net weight: 720g
Dimension: 162 L * 133 W * 141 H
IP: 40m waterproof & 1m shockproof
Working temperature: 0-40℃ (32-104℉)
1 * underwater housing for Fujifilm XT10
1 * O-ring gasket
1 * Cleaning Fluid
1 * Neck strip
1 * wrist rope
1 * Use manal
Attention before use:
Check whether good of performance first. Also check whether have sand and dust inside of case.
Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Make sure there have no water inside. Then put your camera into waterproof case.
The Fujifilm X-T10 was a landmark camera in many ways, with it's extremely high resolution electronic viewfinder, great image quality, 1/32,000 electronic shutter and a threaded cable-release socket to the previous top-of-the-line X-T1. Featuring the same 16 MP X-Trans APS-C sensor, EXR Processor II, same powerful processor, same autofocus system, same battery / battery life, a similar 2.36 million dot OLED viewfinder and same continuous frame rate.
Fujifilm X-T10 specification highlights
3" 920k dot tilting LCD
7 programmable function buttons
Digital Split Image and Focus Highlight Peaking
New zone AF in AF-S/AF-C; wide (tracking) for AF-C; Eye Detection
Full HD movie recording (1080/60p, 36Mbps bitrate), with built-in stereo microphone
16MP X-Trans CMOS II APS-C sensor
EXR Processor II
ISO 200-6400, plus 100 - 51200 expanded (JPEG only)
2.36M dot OLED electronic viewfinder with 0.62x (equiv.) magnification
Built-in pop-up flash
Wi-Fi connectivity with remote control from a smartphone or tablet