Description:
The King Support Sony ADI-TTL, TTL, M mode. provides 7 selectable channels and 3 different groups. For power, both the TX and RX use two AA-sized batteries. Both the TX and RX have an USB-socket to allow firmware updates. Both the TX and RX have a hot-shoe. The RX hot-shoe is for mounting remote Speedlites. However, the TX hot-shoe is not a TTL pass-through shoe, and can not be used to mount an additional Speedlite. Instead Pixel has hinted that they may later introduce a separate control unit (dubbed “N-ETTL”) that can be mounted in the TX hot-shoe and used like the PocketWizard AC3 Zone Controller.
Features:
Support EVSupport flash group setting on transmitterSupport 1st Curtain, 2nd Curtain, High Speed SyncSupport High speed sync for studio and outdoor lightSupport well known brand flashes for High speed sync and TTL (Metz II, Sigma, Sunpak, Nissin)Support well known brand flashes for trigger.(Does not support high speed sync and TTL flash)Support firmware upgradeSupport multi receiver controlSupport flash focusing light
Wireless Frequency System:
System Mode: Digital FSK 2.4GHzOperating Distance:100 meters aboveWireless Channel:7
Performance:
Flash mode: DI-TTL,TTL,MSync Mode: 1st Curtain, 2nd Curtain, High Speed SyncGroup setting:3 difference group (7 combinations)Funcion: King supports flash zooming, focal length, ISO, shutter speed, FV lock and FPShutter Sync Speed:1/8000sCompatible flash:Flashgun, Studio light and outdoor lightFocusing light: Transmitter support with focusing light
Trigger Mode
Transmitter: Input support PC and Hot shoeReceiver: Output support TTL, Hot shoe and connecting cable socket
Socket:
Transmitter: USB, PC, Cable input socket, Hot shoe inputReceiver: USB, PC, Cable output socket, Hot shoe input
Power:
Interface:
Transmitter : USB, PC cable input socket, hot boots input and hot boots output br>
Receiver: USB, PC cable outlet, hot boots output br>Suitable battery :
TX : AAX2pc (support 1.2 V rechargeable batteries) br>
RX: AAX2pc (support 1.2 V rechargeable batteries) br>Standby
TX: 300 Hours(AA 1.2V 2400mAh batteries) br>
RX: 200 Hours(AA 1.2V 2400mAh batteries) br>Dimensions ( L x W x H):
Transmitter: 89mm x 58 mm x 39mm
Receiver: 80mm x 39 mm x 38 mmWeight:
Transmitter: 71 g (without battery)
Receiver: 65 g (without battery)
King receiver compatible with:
SONY ADI-TTL flashSONY HVL-F58AM HVL-F56AM HVL-F42AM HVL-F36AMAftermarket flashMetz II, Sigma, Sunpak, NissinStudio and outdoor flash
SONY A900 A850 A700 A580 A560 A550 A500 A450 A350 A330 A300 A230 A200 A100 A100K...SONY A55 A33 A77 A65 A57
Package contents:
KING Transmitter x1KING Receiver x1PC to 3.5mm studio flash cable x1PC to 6.35mm studio flash cable x1USB cable x1SF-18 Flash Stand Holder x1Receiver holding mount x1(The holding mount is for studio lamp. It has double tape sticker)Protector Soft Case x1English User Manual x1Dansarosa.com offer three shipping methods to worldwide, you could select on shopping cart or checkout page.
1. Free shipping: estimated shipping time 9-19 days (dispatch to address in Latin America, Africa. East Euro may cost 25-50 days, please allow additional time for shipments to P.O. boxes, or military addresses.)
2. Registered Mail: will take 9-19 days (dispatch to address in Latin America, Africa. East Euro may cost 25-50 days, please allow additional time for shipments to P.O. boxes, or military addresses.), shipment can be traced on line.
3.
Express shipping: ships to all major destinations in
5-8 days (remote area may take more time and charges, if you have any question please contact
[email protected]). Note: Due to longer customs clearance times, Standard Shipping times have been extended to 15-30 days for Brazil and 10-15 days for all other destinations in Latin America & East European.
Log In